• SNMX Inserts
SNMX Inserts
  • Product name: SNMX Inserts
  • Series: SNMX
  • Chip-Breakers: GM

beskrivning

Product Information:

Face mills are tools with a large diameter that are used to cut a wide shallow path for facing operations. with PVD coating is resistant to deformation, good wear resistance and collapse resistance, low co-efficient of friction.

SNMX insert with double-sided negative rake 8-sided shape is highly cost-effective. Double front angle design makes good sharpness and a certain strength.

 

Specifications:

Type

Ap

(mm)

Fn

(mm/rev)

CVD


PVD

WD

3020

WD

3040

WD

1025

WD

1325

WD

1525

WD

1328

WR

1010

WR

1520

WR

1525

WR

1028

WR

1330

SNMX1205ANN-GM

1.00-6.00

0.15-0.50



O

O






SNMX1606ANN-GM

1.00-6.00

0.15-0.50



O

O






: Recommended Grade

O: Optional Grade

 

Application:

Facing is used for machining a large flat area, typically the top of the part in preparation for other milling operations.

SNMX insert with its own wiper edge has a high surface finishing with multiple type of chip breakers. It is suitable for general machining of steel and stainless steel.cast iron.super alloys.

 

FAQ:

What milling method is generally recommended?

Down milling is generally recommended. With the down milling method, the burnishing effect can be avoided, resulting in less heat & minimal work-hardening tendency.

 

How is milling done?

The milling process is removing the materials by performing many separate and small cuts. It is accomplished by using a cutter with many teeth, spinning the cutter at a high speed, or advancing the material through the cutter slowly.

Hot Tags: snmx insert,  turningmilling, cutting, grooving, factory, CNC


SEND_US_MAIL
Snälla meddelande så återkommer vi till dig!