- Aha ngwaahịa: PVD mkpuchi mkpuchi
- Usoro: HNMG
- Ndị na-agbaji mgbawa: R/M
DESCRIPTION
Ozi ngwaahịa:
Ịrụ ọnụ ahịa na usoro ntụkwasị obi Tungsten carbide milling na-etinye HNMG. ihu igwe ihe ntinye.it's double-side 12-off Economical face milling cutter with his own wiper agụba na mbepụ onu nwere a ụfọdụ ike na PVD mkpuchi, nke na-enye magburu onwe eyi uwe na ọxịdashọn resistance, ezi chipping resistance.Dimensionally ziri ezi, inogide na ntụkwasị obi arụmọrụ. .
Nkọwapụta:
Ụdị | Ap (mm) | Fn (mm/mkpu) | CVD | PVD | |||||||||
WD3020 | WD3040 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1520 | WR1525 | WR1028 | WR1330 | |||
HNMG0907ANSN-R | 1.50-4.00 | 0.20-0.70 | • | • | O | O | |||||||
HNMG0907ANSN-M | 1.00-3.00 | 0.05-0.15 | • | • | O | O | |||||||
• : Ọkwa akwadoro
O: Ọkwa nhọrọ
Ngwa:
Ụdị ntinye a nwere ike nweta ezigbo njedebe elu, akụ na ụba dị elu, nke kwesịrị ekwesị maka ịme ihe nchara ígwè, igwe anaghị agba nchara, nkedo ígwè na nnukwu alloys.
Ajụjụ:
Kedu ihe bụ mgbawa mgbawa?
Ihe mgbawa mgbawa bụ ubu n'ime ngwa igwe, a na-eme ya site na-egweri oghere parallel.iji gbutuo nsọtụ ma ọ bụ site n'itinye efere n'elu ka ọ bụrụ mgbidi nke mgbawa a na-emepụta na ntụgharị ma ọ bụ ihe ndị ọzọ ga-agbaji. elu.
Kedu ihe bụ carbide mkpuchi?
Carbide ciment kpuchiri ekpuchi pụtara carbide simenti nwere mkpuchi. O nwere mkpuchi PVD na CVD. Carbide kpuchiri ya nwere ike njikọ dị elu na oke iyi uwe. Ọ bụ nhọrọ mbụ maka ngwa na ngwa dị iche iche.
