- DNMG Insert
- Seri: DNMG
- Chip-breakers: AM/AR/AS/BF/BM/BR/CM/DM/SM/TM
deskripsyon
Enfòmasyon sou pwodwi:
DNMG insert se doub-sided 55 ° rhombic, ang clearance 0 °. ak substra optimize ak konbinezon kouch, DNMG gen pèfòmans siperyè. Jeyometri nan insert ka optimize pou aplikasyon D '. Klas ak jeyometri bay segondè fyab. Ekselan deteksyon mete asire tout kwen yo itilize.Ak yon seri de gwosè diferan, nou fè li fasil yo chwazi insert nan vire ideyal pou aplikasyon ou te planifye.
Espesifikasyon:
Aplikasyon | Kalite | Ap (mm) | Fn (mm/rev) | Klas | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD4235 | WD4335 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | ||||
P Semi fini | DNMG150404-AM | 0.60-5.40 | 0.10-0.30 | ● | O | ● | O | O | |||||||
DNMG150408-AM | 1.20-5.40 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
DNMG150412-AM | 1.80-5.40 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
DNMG150604-AM | 0.60-5.40 | 0.10-0.30 | ● | O | ● | O | O | ||||||||
DNMG150608-AM | 1.20-5.40 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
DNMG150612-AM | 1.80-5.40 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
●: Klas Rekòmande
O: Klas si ou vle
Aplikasyon | Kalite | Ap (mm) | Fn (mm/rev) | Klas | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD4235 | WD4335 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | ||||
P Machin ki graj | DNMG150408-AR | 0.80-4.0 | 0.15-0.50 | ● | O | ||||||||||
DNMG150412-AR | 1.20-4.0 | 0.15-0.65 | ● | O | |||||||||||
DNMG150608-AR | 0.80-4.0 | 0.15-0.50 | ● | O | |||||||||||
DNMG150612-AR | 1.20-4.0 | 0.15-0.65 | ● | O | |||||||||||
●: Klas Rekòmande
O: Klas si ou vle
Aplikasyon | Kalite | Ap (mm) | Fn (mm/rev) | Klas | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1525 | WR1330 | ||||
M Fini | DNMG150404-BF | 0.25-2.90 | 0.05-0.15 | ● | ● | O | O | ||||||||
DNMG150408-BF | 0.50-2.90 | 0.10-0.30 | ● | ● | O | O | |||||||||
DNMG150412-BF | 0.75-2.90 | 0.15-0.45 | ● | ● | O | O | |||||||||
DNMG150604-BF | 0.25-2.90 | 0.05-0.15 | ● | ● | O | O | |||||||||
DNMG150608-BF | 0.50-2.90 | 0.10-0.30 | ● | ● | O | O | |||||||||
DNMG150612-BF | 0.75-2.90 | 0.15-0.45 | ● | ● | O | O | |||||||||
●: Klas Rekòmande
O: Klas si ou vle
Aplikasyon | Kalite | Ap (mm) | Fn (mm/rev) | Klas | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1525 | WR1330 | ||||
M Semi fini | DNMG150404-BM | 0.30-3.90 | 0.08-0.25 | O | O | ● | O | O | |||||||
DNMG150408-BM | 0.65-3.90 | 0.15-0.45 | O | O | ● | O | O | ||||||||
DNMG150412-BM | 0.95-3.90 | 0.25-0.65 | O | O | ● | O | O | ||||||||
DNMG150604-BM | 0.30-3.90 | 0.08-0.20 | O | O | ● | O | O | ||||||||
DNMG150608-BM | 0.65-3.90 | 0.15-0.45 | O | O | O | O | |||||||||
DNMG150612-BM | 0.95-3.90 | 0.25-0.65 | O | O | ● | O | O | ||||||||
●: Klas Rekòmande
O: Klas si ou vle
Aplikasyon | Kalite | Ap (mm) | Fn (mm/rev) | Klas | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1528 | WR1330 | ||||
M Machin ki graj | DNMG150404-BR | 0.30-3.90 | 0.08-0.25 | O | O | O | ● | ● | O | ||||||
DNMG150408-BR | 0.65-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
DNMG150412-BR | 0.95-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | |||||||
DNMG150604-BR | 0.30-3.90 | 0.08-0.20 | O | O | O | ● | ● | O | |||||||
DNMG150608-BR | 0.65-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
DNMG150612-BR | 0.95-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | |||||||
●: Klas Rekòmande
O: Klas si ou vle
Aplikasyon | Kalite | Ap (mm) | Fn (mm/rev) | CVD | |||
WD3020 | WD3040 | WD3315 | WD3415 | ||||
K Semi Fini | DNMG150404-CM | 0.40-3.90 | 0.08-0.25 | ● | O | ||
DNMG150408-CM | 0.80-3.90 | 0.15-0.45 | ● | O | |||
DNMG150412-CM | 1.20-3.90 | 0.25-0.65 | ● | O | |||
DNMG150604-CM | 0.40-3.90 | 0.08-0.20 | ● | O | |||
DNMG150608-CM | 0.80-3.90 | 0.15-0.45 | ● | O | |||
DNMG150612-CM | 1.20-3.90 | 0.25-0.65 | ● | O | |||
●: Klas Rekòmande
O: Klas si ou vle
Aplikasyon | Kalite | Ap (mm) | Fn (mm/rev) | Klas | ||||||||||||
CVD | PVD | |||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1520 | WR1525 | WR1028 | WR1030 | ||||
S Semi fini | DNMG150404-DM | 0.40-3.90 | 0.08-0.25 | O | O | O | ● | ● | O | O | ||||||
DNMG150408-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
DNMG150412-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | O | |||||||
DNMG150604-DM | 0.40-3.90 | 0.08-0.20 | O | O | O | ● | ● | O | O | |||||||
DNMG150608-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
DNMG150612-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | O | |||||||
●: Klas Rekòmande
O: Klas si ou vle
Aplikasyon:
Zouti koupe DNMG yo itilize pou grooving, profilage, fini, ak lòt aplikasyon pou machinn.
DNMG se premye chwa pou vire ekstèn nan pyès mens, apwopriye pou fini mwayen ak fini nantout kalite asye.
FAQ:
Ki jan yo chwazi insert vire kòrèk?
Chwazi jeyometri insert ki baze sou operasyon, pou egzanp fini.Chwazi gwosè a insert depann sou pwofondè nan koupe.
Chwazi pi gwo ang nen posib pou fòs ak ekonomi,pi gwo reyon nen posib pou fòs insert.
Ki diferans ki genyen ant fraisage figi ak fraisage fen?
Sa yo se operasyon fraisage ki pi souvan itilize, lè l sèvi avèk diferan kalite kouto - moulen nan fen ak moulen an fas. Diferans ki genyen ant fraisage fen ak fraisage figi se ke yon moulen fen itilize tou de fen a ak kote sa yo nan kouto a, tandiske fraisage figi yo itilize pou koupe orizontal.
Hot Tags: tnmg insert,vire,fraisage, koupe, grooving, faktori,CNC
