- DNMG a’ cuir a-steach
- Sreath: DNMG
- Luchd-brisidh chip: AM/AR/AS/BF/BM/BR/CM/DM/SM/TM
Feuch an cuir thu a-steach na prìomh fhaclan!
Fiosrachadh toraidh:
Tha cuir a-steach DNMG le dà thaobh 55 ° rhombic, ceàrn fuasglaidh 0 °. le measgachadh substrate agus còmhdach làn-leasaichte, tha àrd-choileanadh aig DNMG. Faodar geoimeatraidh cuir a-steach a mheudachadh airson tagradh innealachaidh. Tha ìre agus geoimeatraidh a 'toirt seachad earbsa àrd. Bidh lorg caitheamh sàr-mhath a’ dèanamh cinnteach gu bheil na h-oirean uile air an cleachdadh.Le raon de dhiofar mheudan, bidh sinn ga dhèanamh furasta an cuir a-steach tionndaidh as fheàrr a thaghadh airson na tagraidhean dealbhaichte agad.
Sònrachaidhean:
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD4235 | WD4335 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | ||||
P Semi-chrìochnachadh | DNMG150404-AM | 0.60-5.40 | 0.10-0.30 | ● | O | ● | O | O | |||||||
DNMG150408-AM | 1.20-5.40 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
DNMG150412-AM | 1.80-5.40 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
DNMG150604-AM | 0.60-5.40 | 0.10-0.30 | ● | O | ● | O | O | ||||||||
DNMG150608-AM | 1.20-5.40 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
DNMG150612-AM | 1.80-5.40 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD4235 | WD4335 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | ||||
P Machining garbh | DNMG150408-AR | 0.80-4.0 | 0.15-0.50 | ● | O | ||||||||||
DNMG150412-AR | 1.20-4.0 | 0.15-0.65 | ● | O | |||||||||||
DNMG150608-AR | 0.80-4.0 | 0.15-0.50 | ● | O | |||||||||||
DNMG150612-AR | 1.20-4.0 | 0.15-0.65 | ● | O | |||||||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1525 | WR1330 | ||||
M Crìochnaich | DNMG150404-BF | 0.25-2.90 | 0.05-0.15 | ● | ● | O | O | ||||||||
DNMG150408-BF | 0.50-2.90 | 0.10-0.30 | ● | ● | O | O | |||||||||
DNMG150412-BF | 0.75-2.90 | 0.15-0.45 | ● | ● | O | O | |||||||||
DNMG150604-BF | 0.25-2.90 | 0.05-0.15 | ● | ● | O | O | |||||||||
DNMG150608-BF | 0.50-2.90 | 0.10-0.30 | ● | ● | O | O | |||||||||
DNMG150612-BF | 0.75-2.90 | 0.15-0.45 | ● | ● | O | O | |||||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1525 | WR1330 | ||||
M Semi-chrìochnachadh | DNMG150404-BM | 0.30-3.90 | 0.08-0.25 | O | O | ● | O | O | |||||||
DNMG150408-BM | 0.65-3.90 | 0.15-0.45 | O | O | ● | O | O | ||||||||
DNMG150412-BM | 0.95-3.90 | 0.25-0.65 | O | O | ● | O | O | ||||||||
DNMG150604-BM | 0.30-3.90 | 0.08-0.20 | O | O | ● | O | O | ||||||||
DNMG150608-BM | 0.65-3.90 | 0.15-0.45 | O | O | O | O | |||||||||
DNMG150612-BM | 0.95-3.90 | 0.25-0.65 | O | O | ● | O | O | ||||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | |||||||||||
CVD | PVD | ||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1325 | WR1528 | WR1330 | ||||
M Machining garbh | DNMG150404-BR | 0.30-3.90 | 0.08-0.25 | O | O | O | ● | ● | O | ||||||
DNMG150408-BR | 0.65-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
DNMG150412-BR | 0.95-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | |||||||
DNMG150604-BR | 0.30-3.90 | 0.08-0.20 | O | O | O | ● | ● | O | |||||||
DNMG150608-BR | 0.65-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
DNMG150612-BR | 0.95-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | |||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | CVD | |||
WD3020 | WD3040 | WD3315 | WD3415 | ||||
K Semi Crìochnachadh | DNMG150404-CM | 0.40-3.90 | 0.08-0.25 | ● | O | ||
DNMG150408-CM | 0.80-3.90 | 0.15-0.45 | ● | O | |||
DNMG150412-CM | 1.20-3.90 | 0.25-0.65 | ● | O | |||
DNMG150604-CM | 0.40-3.90 | 0.08-0.20 | ● | O | |||
DNMG150608-CM | 0.80-3.90 | 0.15-0.45 | ● | O | |||
DNMG150612-CM | 1.20-3.90 | 0.25-0.65 | ● | O | |||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas | Seòrsa | Ap (mm) | Fn (mm/rev) | Ìre | ||||||||||||
CVD | PVD | |||||||||||||||
WD4215 | WD4315 | WD4225 | WD4325 | WD1025 | WD1325 | WD1525 | WD1328 | WR1010 | WR1520 | WR1525 | WR1028 | WR1030 | ||||
S Semi-chrìochnachadh | DNMG150404-DM | 0.40-3.90 | 0.08-0.25 | O | O | O | ● | ● | O | O | ||||||
DNMG150408-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
DNMG150412-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | O | |||||||
DNMG150604-DM | 0.40-3.90 | 0.08-0.20 | O | O | O | ● | ● | O | O | |||||||
DNMG150608-DM | 0.80-3.90 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
DNMG150612-DM | 1.20-3.90 | 0.25-0.65 | O | O | O | ● | ● | O | O | |||||||
●: Ìre air a mholadh
O: Ìre Roghainneil
Iarrtas:
Inneal gearraidh DNMG air a chleachdadh airson grooving, pròifil, crìochnachadh, agus tagraidhean innealachaidh eile.
Is e DNMG a’ chiad roghainn airson tionndadh a-muigh de phìosan obrach caol, a tha freagarrach airson crìochnachadh meadhanach agus crìochnachadhgach seòrsa stàilinn.
Ceistean Cumanta:
Ciamar a roghnaicheas tu cuir a-steach tionndadh ceart?
Tagh cuir a-steach geoimeatraidh stèidhichte air obrachadh, mar eisimpleir crìochnachadh.Tagh am meud cuir a-steach a rèir doimhneachd a’ ghearraidh.
Tagh an ceàrn sròin as motha a tha comasach airson neart agus eaconamaidh,an radius sròin as motha airson neart cuir a-steach.
Dè an diofar eadar bleith aghaidh agus muilne deiridh?
Is iad seo na h-obraichean muilleidh as cumanta, a’ cleachdadh diofar sheòrsaichean de luchd-gearraidh - am muileann deiridh agus am muileann aghaidh. Is e an eadar-dhealachadh eadar bleith deiridh agus bleith aghaidh gu bheil muileann crìochnachaidh a’ cleachdadh gach cuid ceann agus taobhan a’ ghearradair, ach thathas a’ cleachdadh bleith aghaidh airson gearradh còmhnard.
Hot Tags: cuir a-steach tnmg,tionndadh,bleith, buain, grooving, factaraidh,CNC
