- Produkt namme: WNMG Inserts
- Searjes: WNMG
- Chipbrekers: AM/AR/BF/BM/BR/CM/DM/
beskriuwing
Produkt Ynformaasje:
WNMG Turning Inserts mei negative (0 °) reliëfhoeke, hawwe sterke râne. De algemiene applikaasjes en wikseljende djipten fan cut ôfhinklik fan chip breaker type oer de measte materialen. WNMG Turning Inserts kinne omgean mei meardere operaasjes troch it kombinearjen fan ferskate chip breakers en grades.it is in hiel goede ekonomyske kar foar jo produksje, sûnt se wurde makke symmetrysk, sadat as de iene snijflak wurdt droegen se kinne draaie nei in oare râne.
Spesifikaasjes：
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 4235 | WD 4335 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | ||||
P Semi Finishing | WNMG080404-AM | 0.60-4.30 | 0.10-0.30 | ● | O | ● | O | O | |||||||
WNMG080408-AM | 1.20-4.30 | 0.20-0.60 | ● | O | ● | O | O | ||||||||
WNMG080412-AM | 1.80-4.30 | 0.30-0.90 | ● | O | ● | O | O | ||||||||
WNMG080416-AM | 2.40-4.30 | 0.40-1.20 | ● | O | ● | O | O | ||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4215 | WD 4225 | WD 4325 | WD 4235 | WD 4335 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | ||||
P Rough Machining | WNMG060408-AR | 0.80-4.00 | 0.15-0.50 | ● | O | ||||||||||
WNMG060412-AR | 0.80-4.00 | 0.15-0.50 | ● | O | |||||||||||
WNMG080408-AR | 0.80-4.50 | 0.15-0.55 | ● | O | |||||||||||
WNMG080412-AR | 0.80-4.50 | 0.20-0.55 | ● | O | |||||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1525 | WR 1330 | ||||
M Finishing | WNMG060404-BF | 0.25-2.40 | 0.05-0.15 | ● | ● | O | O | ||||||||
WNMG060408-BF | 0.50-2.40 | 0.10-0.30 | ● | ● | O | O | |||||||||
WNMG080404-BF | 0.25-3.20 | 0.05-0.15 | ● | ● | O | O | |||||||||
WNMG080408-BF | 0.50-3.20 | 0.10-0.30 | ● | ● | O | O | |||||||||
WNMG080412-BF | 0.75-3.20 | 0.15-0.45 | ● | ● | O | O | |||||||||
WNMG080416-BF | 1.05-3.20 | 0.20-0.60 | ● | ● | O | O | |||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1525 | WR 1330 | ||||
M Semi Finishing | WNMG060404-BM | 0.30-2.10 | 0.10-0.30 | O | O | ● | O | O | |||||||
WNMG060408-BM | 0.65-2.10 | 0.15-0.45 | O | O | ● | O | O | ||||||||
WNMG080404-BM | 0.30-2.90 | 0.10-0.30 | O | O | ● | O | O | ||||||||
WNMG080408-BM | 0.65-2.90 | 0.15-0.45 | O | O | ● | O | O | ||||||||
WNMG080412-BM | 0.95-2.90 | 0.20-0.60 | O | O | ● | O | O | ||||||||
WNMG080416-BM | 1.25-2.90 | 0.25-0.75 | O | O | ● | O | O | ||||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||||||||||
CVD | PVD | ||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1325 | WR 1528 | WR 1330 | ||||
M Rough Machining | WNMG060404-BR | 0.30-2.10 | 0.10-0.30 | O | O | O | ● | ● | O | ||||||
WNMG060408-BR | 0.65-2.10 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
WNMG080404-BR | 0.30-2.90 | 0.10-0.30 | O | O | O | ● | ● | O | |||||||
WNMG080408-BR | 0.65-2.90 | 0.15-0.45 | O | O | O | ● | ● | O | |||||||
WNMG080412-BR | 0.95-2.90 | 0.20-0.60 | O | O | O | ● | ● | O | |||||||
WNMG080416-BR | 1.25-2.90 | 0.25-0.75 | O | O | O | ● | ● | O | |||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | |||
CVD | |||||||
WD3020 | WD3040 | WD3315 | WD3415 | ||||
K Semi Finishing | WNMG080404-CM | 0.08-0.25 | 0.40-2.90 | ● | ● | ||
WNMG080408-CM | 0.15-0.45 | 0.80-2.90 | ● | ● | |||
WNMG080412-CM | 0.25-0.66 | 1.20-2.90 | ● | ● | |||
• : Recommended Grade
O: Opsjonele Grade
Oanfraach | Type | Ap (mm) | Fn (mm/omw.) | Klasse | ||||||||||||
CVD | PVD | |||||||||||||||
WD 4215 | WD 4315 | WD 4225 | WD 4325 | WD 1025 | WD 1325 | WD 1525 | WD 1328 | WR 1010 | WR 1520 | WR 1525 | WR 1028 | WR 1330 | ||||
S Semi Finishing | WNMG080404-DM | 0.40-4.30 | 0.08-0.25 | O | O | O | ● | ● | O | O | ||||||
WNMG080408-DM | 0.80-4.30 | 0.15-0.45 | O | O | O | ● | ● | O | O | |||||||
WNMG080412-DM | 1.20-4.30 | 0.25-0.66 | O | O | O | ● | ● | O | O | |||||||
WNMG080416-DM | 1.60-4.30 | 0.30-0.90 | O | O | O | ● | ● | O | O | |||||||
●: Recommended Grade
O: Opsjonele Grade
Oanfraach:
Dizze WNMG Turning Inserts kinne omgean mei meardere operaasjes troch it kombinearjen fan ferskate chip breakers en grades. Oanrikkemandearre foar rûge, semi-finishing en finishing fan Machtigingsformulier measte stielen, RVS, getten izeren en super alloys ûnder stabile omstannichheden.
FAQ:
Wat is it ferskil tuskennegatyfenposityfynsette?
It ferskil tuskenNegatyfenPosityfynfoegje leit yn se mei ferskillende klaring hoek.De positive ynserts hawwe klaringshoek tusken 1 graad oant 90 graad.De klaringshoek fan negative ynfoegje is o graad.
Hokker ynsettype is de bêste kar foar rûge ferwurking?
As jo nedich hawwe roughing en algemiene turning .de negative ynserts binne de earste en bêste opsje. negative insert lit djipper djipten en hegere feed tariven fanwege sterke ynfoegje foarmen en dikte.
Hot Tags: WNMG ynfoegje,draaie,milling, cutting, grooving, fabryk, wnmg 0804, wnmg insert angle, wnmg 080404, wnmg06
